Chair reupholstering – It may be due to a remodeling or because as our chair upholstery is not in good condition , it may happen that we need to make a change in the upholstery that has one of our chairs. Remove front reupholstered. Make any arrangements that are necessary in the structure of the wood. After that, we proceed to put the first fabric reupholstery, this obviously will not be the one left to look at, but certainly will give more tidiness to work.
You must leave at least about two centimeters hem on the mold in which as we correct size. Fixing the fabric then begins. Staples are placed, leaving a hem to the inside. All this must go by slowly, very gently, trying not occur or remain gathers or bulging areas. After the fixed mold, we proceed to cut the fabric chair reupholstering.
8 Photos Gallery of: Chair Reupholstering Design
The chair reupholsteringfabric is placed in the center, especially if it is printed. It is also hemmed moves inwards, and then stapled. It is set a place and then alternates with the opposite side. All this trying to be deformed. Ultimately tape used to cover the staples, this also will neatness and finish